Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Terasaka, Yuta; Sato, Yuki; Uritani, Akira*
Nuclear Instruments and Methods in Physics Research A, 1062, p.169227_1 - 169227_6, 2024/05
Collaborative Laboratories for Advanced Decommissioning Science; Okayama University*
JAEA-Review 2023-038, 48 Pages, 2024/03
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2022. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2022, this report summarizes the research results of the "Embedded system using a radiation-hardened processor" conducted in FY2022. The present study aims to be developing a radiation-hardened optoelectronic processor with a 10 MGy total-ionizing-dose (TID) tolerance, a radiation-hardened processor without any optical component with a 4 MGy TID tolerance, a radiation-hardened memory with a 4 MGy TID tolerance, and a radiation-hardened power supply unit with a 1 MGy TID tolerance. Moreover, Japanese research group will support radiation- hardened field programmable gate arrays, power supply units, and radiation-hardened optical systems for radiation-hardened robot systems and radiation sensor systems developed by UK team.
Choi, B.; Nishida, Akemi; Kawata, Manabu; Shiomi, Tadahiko; Li, Y.
JAEA-Research 2024-001, 206 Pages, 2024/03
In the assessment of seismic safety and the design of building structures in nuclear facilities, lumped mass models have been used as standard methods. Recent advances in computer capabilities allow the use of three-dimensional finite element (3D FE) models to account for the 3D behavior of buildings, material nonlinearity, and the nonlinear soil-structure interaction effect. While 3D analysis method has many advantages, it is necessary to ensure its reliability as a new approach. The International Atomic Energy Agency performed an international benchmark study using the 3D FE analysis model for reactor building of Unit 7 at TEPCO's Kashiwazaki-Kariwa Nuclear Power Station based on recordings from the Niigataken Chuetsu-oki Earthquake in 2007. Multiple organizations from different countries participated in this study and the variation in their analytical results was significant, indicating an urgent need to improve the reliability of the analytical results by standardization of the analytical methods using 3D FE models. Additionally, it has been pointed out that it is necessary to understand the 3D behavior in the seismic fragility assessment of buildings and equipment, using realistic seismic response analysis method based on 3D FE models. In view of these considerations, a guideline for the seismic response analysis method using a 3D FE model was developed by incorporating the latest knowledge and findings in this area. The purpose of the guideline is to improve the reliability of the seismic response analysis method using 3D FE model of reactor buildings. The guideline consists of a main body, commentaries, and appendixes. The standard procedures, recommendations, key points to note, and technological bases for conducting seismic response analysis on reactor buildings using 3D FE models are provided in the guideline. In addition, the guideline will be revised reflecting the latest knowledge.
Tamura, Koji; Nakanishi, Ryuzo; Oba, Hironori; Karino, Takahiro; Shibata, Takuya; Taira, Takunori*; Wakaida, Ikuo
Journal of Nuclear Science and Technology, 8 Pages, 2024/00
Times Cited Count:0 Percentile:0.01(Nuclear Science & Technology)Suzuki, Seiya; Nemoto, Yoshihiro*; Shiiki, Natsumi*; Nakayama, Yoshiko*; Takeguchi, Masaki*
Annalen der Physik, 535(9), p.2300122_1 - 2300122_12, 2023/09
Times Cited Count:0 Percentile:0(Physics, Multidisciplinary)Wang, Q.*; Ma, N.*; Huang, W.*; Shi, J.*; Luo, X.-T.*; Tomitaka, Sora*; Morooka, Satoshi; Watanabe, Makoto*
Materials Research Letters (Internet), 11(9), p.742 - 748, 2023/09
Ariyoshi, Gen; Saruta, Koichi; Kogawa, Hiroyuki; Futakawa, Masatoshi; Maeno, Koki*; Li, Y.*; Tsutsui, Kihei*
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.1407 - 1420, 2023/08
Cavitation damage on a target vessel due to proton beam-induced pressure waves is one of the crucial issues for the pulsed neutron source using a mercury spallation target. As a mitigation technique for the damage, the helium microbubble injection into the mercury has been carried out by using a swirl bubbler in order to utilize compressibility of bubbles. Moreover, double-walled structure, which consists of an outer wall and an inner wall, has been applied as the target head structure. In this study, we aim to develop an abnormality diagnostic technology to detect the inner wall cracking, which is caused by such cavitation damage, from the outside of the target vessel. The mercury flow fields in the case with the cracking are evaluated by computational fluid dynamics analysis based on finite element method. And then, effect of the cracking on the flow field is discussed from the point of view of the flow-induced vibration and the acoustic vibration.
Fueda, Kazuki*; Komiya, Tatsuki*; Minomo, Kenta*; Horie, Kenji*; Takehara, Mami*; Yamasaki, Shinya*; Shiotsu, Hiroyuki; Onuki, Toshihiko*; Grambow, B.*; Law, G. T. W.*; et al.
Chemosphere, 328, p.138566_1 - 138566_12, 2023/07
Times Cited Count:1 Percentile:46.42(Environmental Sciences)Li, S.; Yamaguchi, Yoshihito; Katsuyama, Jinya; Li, Y.; Deng, D.*
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 7 Pages, 2023/07
Tokunaga, Sho; Horiguchi, Hironori; Nakamura, Takemi
JAEA-Technology 2023-001, 37 Pages, 2023/05
The cold neutron source (CNS) of the research reactor JRR-3 converts thermal neutrons generated in the reactor into low-energy cold neutrons by moderating them with liquid hydrogen stored in the moderator cell. Cold neutrons generated by the CNS are transported to experimental instruments using neutron conduits, and are used for many studies of physical properties, mainly in life science, polymer science, environmental science, etc. Improvement of cold neutron intensity is essential to maintain competitiveness with the world's research reactors in neutron science, and we are developing a new CNS that incorporates new knowledge. The current moderator cell for the CNS of JRR-3 is a stainless-steel container which is a canteen bottle type, and the cold neutron intensity can be improved by changing the material and shape. Therefore, the basic specifications of the new moderator cell were changed to aluminum alloy which has a smaller neutron absorption cross section, and the shape was optimized using a Monte Carlo code MCNP. Since these changes in specifications will result in changes in heat generation and heat transfer conditions, the CNS of JRR-3 was re-evaluated in terms of self-regulating characteristic, heat transport limits, heat resistance and pressure resistance, etc., to confirm its feasibility in thermal-hydraulic design. This report summarizes the results of the thermal-hydraulic design evaluation of the new moderator cell.
Iyota, Muneyoshi*; Matsuda, Tomoki*; Sano, Tomokazu*; Shigeta, Masaya*; Shobu, Takahisa; Yumoto, Hirokatsu*; Koyama, Takahisa*; Yamazaki, Hiroshi*; Semba, Yasunori*; Ohashi, Haruhiko*; et al.
Journal of Manufacturing Processes, 94, p.424 - 434, 2023/05
Times Cited Count:3 Percentile:83.33(Engineering, Manufacturing)Luu, V. N.; Nakajima, Kunihisa
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
Tsujimura, Norio
Hokeikyo Nyusu, (71), p.2 - 5, 2023/04
The TLD badge, a personal dosimeter using a thermoluminescence dosemeter, currently in operation at the Nuclear Fuel Cycle Engineering Laboratories of the Japan Atomic Energy Agency (JAEA-NCL), was developed in collaboration with Matsushita Industrial Co., Ltd. (now Panasonic System Solutions Japan Co., Ltd.), and was put into operation in 1982. Since then, the TLD badge has been used not only at NCL but also in Japan and overseas for a long time. However, the TLD badge system will no longer be accepted for new production by the manufacturer in 2019, and maintenance and repair services for the TLD readers will cease in 2027. In addition, a performance accreditation system for personal dosimetry will be introduced in Japan, and accredited personal dosemeters will be required under the revised enforcement regulations of the RI Law (from October 2023). Given these changes in the circumstance, NCL has decided to abandon the in-house measurement service and switch to commercially available accredited personal dosemeters in the future. In this paper, the development history and design concept of the TLD badge are outlined along with the historical development of the operational quantities, and the findings obtained from more than 40 years of operational experience with the TLD badge are presented.
Terasaka, Yuta; Uritani, Akira*
Nuclear Instruments and Methods in Physics Research A, 1049, p.168071_1 - 168071_7, 2023/04
Times Cited Count:1 Percentile:68.31(Instruments & Instrumentation)Suzuki, Kenji*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Shobu, Takahisa; Morooka, Satoshi
Zairyo, 72(4), p.316 - 323, 2023/04
Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*
JAEA-Review 2022-065, 111 Pages, 2023/03
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of high-resolution imaging camera for alpha dust" conducted from FY2018 to FY2021. Since the final year of this proposal was FY2021, the results for four fiscal years were summarized. The present study aims to develop a novel alpha-ray camera consisting of imaging and an energy spectrometer to find the alpha dust to reduce the risk of health damage in decommissioning. We have developed the camera with a position resolution of less than 10 m, and the measurement test for the energy spectra was operated using several alpha-ray sources with an unfolding method.
Luu, V. N.; Nakajima, Kunihisa
Journal of Nuclear Science and Technology, 60(2), p.153 - 164, 2023/02
Times Cited Count:4 Percentile:76.47(Nuclear Science & Technology)Davies, S. J. C.*; Bolea-Alamanac, B.*; Endo, Kaori*; Yamamoto, Yu*; Yamasaki, Shudo*; Malins, A.; Evans, J.*; Sullivan, S.*; Ando, Shuntaro*; Nishida, Atsushi*; et al.
Journal of Transport & Health, 28, p.101564_1 - 101564_11, 2023/01
Teshigawara, Makoto; Ikeda, Yujiro*; Yan, M.*; Muramatsu, Kazuo*; Sutani, Koichi*; Fukuzumi, Masafumi*; Noda, Yohei*; Koizumi, Satoshi*; Saruta, Koichi; Otake, Yoshie*
Nanomaterials (Internet), 13(1), p.76_1 - 76_9, 2023/01
Times Cited Count:2 Percentile:71.03(Chemistry, Multidisciplinary)To enhance neutron intensity below cold neutrons, it is proposed that nanosized graphene aggregation could facilitate neutron coherent scattering under particle size conditions similar to nanodiamond. It might also be possible to use it in high neutron radiation conditions due to graphene's strong sp2 bonds. Using the RIKEN accelerator-driven compact neutron source and iMATERIA at J-PARC, we performed neutron measurement experiments, total neutron cross-section, and small-angle neutron scattering on nanosized graphene aggregation. The measured data revealed, for the first time, that nanosized graphene aggregation increased the total cross-sections and small-angle scattering in the cold neutron energy region, most likely due to coherent scattering, resulting in higher neutron intensities, similar to nanodiamond.
Kaburagi, Masaaki; Shimazoe, Kenji*; Terasaka, Yuta; Tomita, Hideki*; Yoshihashi, Sachiko*; Yamazaki, Atsushi*; Uritani, Akira*; Takahashi, Hiroyuki*
Nuclear Instruments and Methods in Physics Research A, 1046, p.167636_1 - 167636_8, 2023/01
Times Cited Count:3 Percentile:94.27(Instruments & Instrumentation)We focus on the thickness and property controls of inorganic scintillators used for thermal neutron detection in intense -ray fields without considering pulse shape discrimination techniques. GS20 (a lithium glass) and LiCaAlF:Ce(LiCAF:Ce) cintillators with thicknesses of 0.5 and 1.0 mm, respectively, have been employed. Pulse signals generated by photomultiplier tubes, to which the scintillators were coupled, were inserted into a digital pulse processing unit with 1 Gsps, and the areas of waveforms were integrated for 360 ns. In a Co -ray field, the neutron detection for GS20 with a 0.5-mm thickness was possible at dose rates of up to 0.919 Gy/h; however, for LiCAF:Ce, neutron detection was possible at 0.473 Gy/h, and it failed at 0.709 Gy/h. Threfore, in a Co -ray field, the neutron/-ray discrimination of GS20 was better than that of LiCAF:Ce due to its better energy resolution and higher detection efficiency.